Can You Wake Up Windows Computer Using A Mac Teamviewer

08-05-2021 by

Learning has never been so easy!

Sep 04, 2016  I am trying to set up Wake-On-LAN with TeamViewer 11 and am stumbling when it comes to connecting from outside my home network. I have set it up and it works when I select 'Other TeamViewer within your local network', but I tried to set it up to work with 'Public address' and nothing, it won't even let me select that option. Wake on LAN is a cross-compatible protocol that can be used with TeamViewer on Windows, Windows 10, macOS and Linux devices. This versatility ensures that any technical support offered using WoL is consistent across machines; no matter your customers’ or clients’ preferred operating systems, you can move seamlessly between them. Jun 05, 2013 Then just use something like TeamViewer and setup the server module on the computer and use the client from the Mac, Linux, Windows, Android or iOS device. With this enabled it will wake up the computer for remote access. I know this is probably a real basic thing for most of you out there but I am stumped. Can anyone help me set up remote access so I can wake up a sleeping mac and access my work desktop remotley from my phone or other laptop? The sleeping mac is an imac desktop running 10.11.3, 4GHz itel core i7, 32 GB. Oct 22, 2014  In this video I will show you how to set up TeamViewer for Wake On Lan so that you can allow your computer to go into Sleep mode to save power and still access it from a remote computer.

Depicus Wake on Lan is a small and portable tool that is able to boot up a computer using Wake-on-LAN over the internet or over the local network. Simply select Internet or Local subnet from the dropdown and enter the MAC address, IP address or host name, subnet mask (usually 255.255.255.255), and the port.

Wake-on-LAN (WoL) is a network standard that allows you to remotely connect a computer, whether it is asleep, sleep, or even completely disconnected. It works by receiving the so-called “magic packet”, which is sent from the WoL client.

It also does not matter what operating system the computer will boot into (Windows, Mac, Ubuntu, etc.), you can use Wake-on-LAN to turn on any computer that receives a magic packet. The computer hardware must support Wake-on-LAN with a compatible BIOS and network interface card, so not every computer can automatically use Wake-on-LAN.

4 Steps total

Step 1: BIOS setup

The first thing you need to do to enable WoL is to set up the BIOS correctly so that the software can listen for incoming wake up requests.

Each manufacturer will have unique steps, so what you see below cannot accurately describe your installation. If these instructions do not help, find out your BIOS manufacturer and check their website for a user guide on how to enter the BIOS and find the WoL function.

1. Enter the BIOS instead of booting into your operating system.
2. Find a section that relates to power, for example, Power Management. This may be in the Advanced section. Other manufacturers may call it Resume On LAN, for example, on a Mac. On most BIOS screens, there is a help section on the side that describes what each setting does when it is turned on. It is possible that the name of the WoL parameter in your computer's BIOS is unclear.
3. Once you find the WoL setting, you can most likely press Enter to immediately switch it or show a small menu that allows you to turn it on and off, as well as turn it on and off.
4. Save the changes. This is not the same on every computer, but on many F10 keys it will persist and exit the BIOS. The bottom of the BIOS screen should give some instructions on saving and exiting.

Step 2: Installing WoL in the Windows operating system

Windows Wake-on-LAN is configured through the device manager. Here you can configure several settings:

1. Open the device manager.
2. Find and open the Network Adapters section. You can ignore any Bluetooth connections and virtual adapters. Double-click (or double-click) Network adapters, or select the small + or> next to it to expand this section.
3. Right-click or touch and hold the adapter belonging to the active Internet connection. Examples of what you can see are Realtek PCIe GBE Family Controller or Intel Network Connection, but it depends on your computer.
4. Select 'Properties'.
5. Open the Advanced tab.
6. In the 'Properties' section, click or select 'Wake Up By Magic Package.' If you cannot find it, go to step 8; Wake-on-LAN can still work.
7. Go to the menu value on the right and select “Enabled”.
8. Open the Power Management tab. It can be called Power, depending on your version of Windows or a network card.
9. Make sure these two options are on: allow this device to wake the computer and allow only the magic packet to wake the computer. Instead, these settings may be under the Wake-on-LAN section and be a single setting called the Wake on Magic Packet.
If you do not see these settings or they are inactive, try updating the network adapter device drivers; but remember that it is possible that your network card simply does not support WoL. This is most likely true for wireless network interface cards (NIC).
10. Click or tap OK to save the changes and exit this window. You can also close the device manager.

Step 3: How to use wake-on-lan

Now that the computer is fully configured to use Wake-on-LAN, you need a program that can send the magic packet that is required to start the run. TeamViewer is one example of a free remote access tool that supports Wake-on-LAN. Since TeamViewer is designed specifically for remote access, its WoL feature is convenient for those times when you need to your computer when idle, but forgot to turn it on before you left.

TeamViewer can use Wake-on-LAN in two ways. One of them is through the public IP address of the network, and the other is through another TeamViewer account on the same network (provided that this other computer is turned on). This allows you to wake up the computer without configuring the router ports (more on this below), since another local computer where TeamViewer is installed can relay the WoL request internally.

Another great Wake-on-LAN tool is Depicus, and it works from different places. You can use your WoL function through your website without downloading anything, but they also have a GUI and command line tool available for both Windows (free of charge) and MacOS, as well as for mobile applications Wake-on-LAN for Android and iOS.

Some other free Wake-on-LAN apps include Wake On LAN for Android and RemoteBoot WOL for iOS. WakeOnLan is another free WoL tool for macOS, and Windows users can also choose the Wake On Lan Magic packages.

Step 4: Troubleshoot wake-up problems over LAN

If you followed the steps above, it turned out that your device supports Wake-on-LAN without any problems, but when you try to turn on the computer it still does not work, you may also need to turn it on through the router. To do this, you need to log in to your router to make some changes.
A magic packet that runs on a computer is usually sent as a UDP datagram over port 7 or 9. If this is the case with the program that you use to send a packet, and you try to do it from outside the network, you need to open these ports on router and redirect requests to every IP address on the network.
Redirecting WoL magic packets to a specific client IP address will be meaningless, as the computer with the power off does not have an active IP address. However, since port forwarding requires a specific IP address, you must ensure that the port (s) are redirected to the so-called broadcast address so that it gets to each client computer. This address is in *. *. *.
For example, if you specify the IP address of your router as 192.168.1.1, use the address 192.168.1.255 as the forwarding port. If this is 192.168.2.1, you should use 192.168.2.255. The same is true for other addresses, such as 10.0.0.2, which will use the IP address 10.0.0.255 as the forwarding address.
You might also want to consider signing up for a Dynamic DNS (DDNS) service, such as No-IP. Thus, even if the IP address associated with the WoL network changes, DNS will update to reflect this change and still allow you to wake the computer. DDNS service is really useful only when you turn on the computer from outside the network, for example, from your phone when you are not at home.

Published: Mar 27, 2019 · Last Updated: Apr 03, 2019

References

  • Wake-on-LAN setup

5 Comments

  • Mace
    adrian_ych Mar 27, 2019 at 07:51am

    Is this info not readily available ??

    Then since you brought up WOL using Teamviewer (or other remote access software), are you very sure thats all you need to remotely power up a PC via the Internet ?

  • Cayenne
    Cuber Mar 27, 2019 at 08:02am

    'This allows you to wake up the computer without configuring the router ports (more on this below)'

    - this part doesn't exist

  • Thai Pepper
    Peter (Action1) Mar 27, 2019 at 09:14am

    Thanks for your review. I've modified a little bit this article.

  • Cayenne
    furicle Mar 27, 2019 at 02:51pm

    # original source from http://www.windowsitpro.com/article/networking/q-how-can-i-easily-send-a-magic-packet-to-wake-a-machine-on-my-subnet-
    function wol {
    param ([String]$MACAddrString = $(throw 'No MAC addressed passed, please pass as xx:xx:xx:xx:xx:xx'))
    $MACAddr = $macAddrString.split(':') | %{ [byte]('0x' + $_) }
    if ($MACAddr.Length -ne 6)
    {
    throw 'MAC address must be format xx:xx:xx:xx:xx:xx'
    }
    $UDPclient = new-Object System.Net.Sockets.UdpClient
    $UDPclient.Connect(([System.Net.IPAddress]::Broadcast),4000)
    $packet = [byte[]](,0xFF * 6)
    $packet += $MACAddr * 16
    [void] $UDPclient.Send($packet, $packet.Length)
    write 'Wake-On-Lan magic packet sent to $MACAddrString, length $($packet.Length)'
    }

  • Poblano
    ReallyRosie May 12, 2019 at 02:41pm

    Interesting! Thanks for posting that, I would never think to look there!

If your Mac goes to sleep unexpectedly

Make sure that Energy Saver is set up the way you want: choose Apple () menu > System Preferences, then click Energy Saver. Adjust one or more of the following controls to affect when your Mac goes to sleep. Some of these controls might not be available on your Mac.

  • 'Turn display off after' slider
  • 'Display sleep' slider
  • 'Computer sleep' slider
    If a slider is set to 'Never,' sleep is disabled for that feature.
  • Schedule button

Make sure that you aren't putting your Mac to sleep accidentally:

  • Pressing the power button can put your Mac to sleep.
  • Moving your mouse pointer to a hot corner can put your Mac to sleep, depending on your Mission Control settings. Choose Apple menu > System Preferences, then click Mission Control. Click the Hot Corners button, then see if any of the corners are set to 'Put Display to Sleep.'
  • Using magnets near your Mac notebook can put your Mac to sleep.

If your Mac doesn't go to sleep when you expect

Check your Energy Saver settings as described above, and be aware that your Mac won't automatically go to sleep unless it's inactive:

  • The same network activities that can wake your Mac can also keep your Mac from sleeping.
  • Any app or other process that's running on your Mac could also be keeping your Mac awake. Check the Energy Saver pane of Activity Monitor to identify apps that need your Mac to be awake. If 'Yes' appears in the Preventing Sleep column for an app, your Mac won't automatically sleep while the app is running. Other apps prevent sleep only when doing certain things, such playing music or video, printing, or downloading files.

If you started from macOS Recovery on a Mac notebook, automatic sleep is disabled as long as the Mac is using AC power.

If your Mac wakes unexpectedly

Your Mac might wake for these activities:

Can You Wake Up Windows Computer Using A Mac Teamviewer Free

  • Network activity that uses the Wake on Demand feature. Examples of network activity include iTunes sharing, photo sharing, printer sharing, file sharing, and using Back to My Mac.*
  • Enhanced notifications from FaceTime, Messages, and other apps and services.
  • Bluetooth activity. To prevent Bluetooth devices from waking your Mac, choose Apple menu > System Preferences, then click Bluetooth. Click the Advanced Button, then deselect 'Allow Bluetooth devices to wake this computer.'

If you have a MacBook Pro (2016 or later) or MacBook (Retina, 12-inch, 2017), note that these models are designed to start up when you open their lids or connect them to power.

*As of July 1, 2019, Back to My Mac service is no longer available.

If your Mac doesn't wake when you expect

Your Mac might pause a few seconds before it wakes up. If it doesn't seem to wake at all, check for these possibilities:

Can You Wake Up Windows Computer Using A Mac Teamviewer
  • Your screen brightness might be turned down.
  • If you're using an external display, your display might be turned off.
  • Your Mac might be in safe sleep. To wake from safe sleep, press the power button.
  • Check for a sleep indicator light, if applicable, and make sure that your Mac isn't turned off.

If the previous steps don't work

These additional steps may help identify or resolve the issue:

  • Reset the SMC.
  • Reset NVRAM.
  • Disconnect external devices other than your Apple keyboard, mouse, and display. If that resolves the issue, gradually reconnect your devices, testing each time, until you find the device that is interfering with sleep. Then check the documentation that came with the device, or contact the device manufacturer.
  • Start up in Safe Mode to see if the issue is related to non-Apple startup items, login items, or kernel extensions.
  • Try to isolate the issue by using another user account.

Can You Wake Up Windows Computer Using A Mac Teamviewer 10

If you still see the issue, contact Apple Support.

Can You Wake Up Windows Computer Using A Mac Teamviewer Download

FaceTime is not available in all countries or regions.

Using Maschine With Scratch Live
How To Export A Song From Garageband To Mp3 Ipad

Comments are closed.